Cyclades PM IPDU User Manual
Chapter 4: Command Line Interface
33
The following commands are available only to the admin user.
NOTE: When a range of outlets is used in a command and the range spans more than one PM IPDU in a daisy
chain, the range of outlets must not be specified by name. The range of outlets may only be specified by number
in this situation.
chain, the range of outlets must not be specified by name. The range of outlets may only be specified by number
in this situation.
adduser
The adduser command adds one username to the internal database. A maximum of eight characters
(not case sensitive) is allowed, and a maximum of eight individual users is allowed. This command
is available to the admin user only.
(not case sensitive) is allowed, and a maximum of eight individual users is allowed. This command
is available to the admin user only.
Syntax
adduser <user>
Arguments
<user>
username
Examples
To add a user, enter the following.
Table 4.2: Admin User (privileged) Commands
Admin User Command
Admin User Command
pm>adduser popper
Password:
Re-enter password:
Username/password set for user popper.
pm>