Cyclades PM IPDU User Manual

        Cyclades PM IPDU Installer/Administrator/User Guide

The upgrade command is available only to the administrator. This command goes directly to the 
boot options menu before actually rebooting. You may either upgrade or boot the firmware.

NOTE: For details on upgrading using the upgrade command or using the reboot command, see Upgrading the 
Cyclades PM IPDU Firmware on page 26.

upgrade <IPDU#>|<IPDU_ID>

<IPDU#> 

IPDU number in a daisy chain

<IPDU_ID> 

Identification string previously set by the id command

NOTE: If you wish to upgrade more than one IPDU, it is recommended that you upgrade the most remote 
IPDU first.