Crane Merchandising Systems Hot Beverage Maker 670 User Manual

6700001

Page - B3

November,  2002

The infrared mug/cup sensor can sense the presence of a mug or cup without using
moving parts.

The sensor is equipped with an indicator light.  This light will help you get the best results
from the infrared mug/cup sensor.

Under these conditions:

· Machine door open
· Cup station in place
· No cup in the station

The indicator light should be off.  If it is on, it is indicating improper cup station alignment
or excessive sensor sensitivity.

Under these conditions:

· Machine door closed
· Cup station in place
· No cup in the station

Press any letter on the selection switch panel, for example, A.  Only the letter A should
be showing in the message display.  If “

A MUG” is displayed, it indicates one or more

of the following:

· Improper cup station alignment
· Excessive sensitivity (the sensor is sensing the delivery door)
· Cup station lens is not clean

As indicated in the Sanitation section, you should remove the cup station to clean it.
Pay particular attention to the dark colored infrared mug/cup sensor lens, which is part
of the cup station.  If it is not thoroughly cleaned, the sensor will not work properly.

Cleaning the infrared mug/cup sensor unit itself is not usually necessary.  If it does
require cleaning, just wipe it with a damp cloth.