Fusion Electronics Car Video System MS-IP700 User Manual

54

2.  (if required) turn and then press the Encoder to select Parental > Unlock. 

Enter your access code.

3.  Select the Lock/Unlock menu item.
4.  Turn the Encoder to highlight a channel then press the Encoder to  

lock ( ) or unlock ( ) the channel, as required.

5.  Press the Menu key (or leave to time out) to exit.

Channel skipping gives the user the ability to set a channel to be skipped / 
missed while navigating via the Forward and Back key in the SiriusXM Source 
Screen. The user still able to navigate to a skipped channel via the channel list 
found in the menu. 

To set or unset a channel from being skipped:
1.  Press the Menu key.
2.  (if required) turn and then press the Encoder to select Parental > Unlock.

Enter your access code.

3.  Select the Skip/UnSkip menu item.
4.  Turn the Encoder to highlight a channel then press the Encoder to turn on

( ) or turn off ( ) skip, as required.

5.  Press the Menu key (or leave to time out) to exit.

 

The settings described in this section are usually set up when the unit is  
installed and not changed again.

Use the sub filter setting to control the sub-woofer cutoff frequency. Audio  
signals above the selected frequency will not be passed on to the sub-woofer.
The sub filter settings apply to all sub-woofer outputs.