Furuno DOPPLER SPEED LOG DS-80 User Manual

The System Menu 2 contains the diagnostic

test and selection of dimmer control and

display language.

1. Press the [MENU] key to open the

menu.

2. Select SYSTEM MENU 2 and press the

[ENT] key.

SYSTEM MENU2

DIMMER            INTERNAL
         /LANG.   ENGLISH

                            ENT: SET

TEST: Checks the equipment for proper

operation. For further details see Chapter 3.

DIMMER: See paragraph 1.3.2.

LANG.: Selects the language to use in

menus, English or Japanese.

The demonstration mode outputs the

Doppler speed signal to external equipment.

This checks if the signal is being correctly

output. )

1. Press the [MENU] key to open the

menu.

2. Select DEMO and press the [ENT] key.

DEMO

SPEED
                      

DATA DISPLAY           OFF

                            ENT: SET

3. Select SPEED and press the [ENT] key.

4. Select the digit to change with   or  .

5. Use 

 

 or 

 

 to set. (The setting range

is

-10.0 to +40.0 kt, and the default setting

is +10.0 kt.)

6. Press the [ENT] key.

7. Press the [ENT] key to open the DATA

DISPLAY menu.

DEMO

SPEED
                                            + 1 0 . 0   k t
DATA  DISPLAY          

                 ENT: SET

ON

8. Press 

  

 to select ON and press the

[ENT] key.

9.  Press the [MENU] key twice to close the

menu.

The indication “DEMO” appears at the top

right-hand corner when the demo mode is

on. To turn off the demonstration display,

show the DEMO menu and set SPD to OFF.

SPEED

DEMO

  

DISTANCE

Demonstration
mode "ON"

kt