Funai NB530SLX Owner's Manual

*) Settings with (*) are the default.
• For “Speaker Size” setting, the settings of each speaker size may be adjusted automatically corresponding to each 

• For “Delay Time”, the difference between the value of the “Front”,  “Surround” and “Surround Back” setting cannot 

exceed 15 ft (4.5m),  and the difference between the value of the “Front” and  “Center” setting cannot exceed 5 ft 
(1.5m). 

• For “Delay Time”, the value of the “Center”, “Surround” and  “Surround Back” setting cannot exceed the value of  the 

“Front” setting. 

• For “Delay Time”, the setting of “Center”, “Surround” and  “Surround Back” will be changed automatically to the setting 

value of  the “Front”. (e.g., If the “Front” is set to 60ft (18m),  the setting of “Center”, “Surround” and  “Surround Back” 
will be changed to 60ft (18m) as well.) 

Channel Level
Tests or sets the 
volume for each 
speaker.

Test Tone:
“Test Tone” is the test 
tone which can be 
output from the 
speakers so you can 
adjust the volume for 
each speaker.

Select “Off” to deactivate “Test Tone”.
Select “Manual”, then press [ENTER] to 
manually set the volume for the desired 
speaker.
Select “Auto”, then press [ENTER] to 
automatically output the test tone from each 
speaker.

If you have selected “Manual” in “Test Tone”, 
select the desired speaker to set and adjust 
the volume for the selected speaker.
If you select “Auto” in “Test Tone”, test tone 
will automatically be output in order. Adjust 
the volume of the speaker that outputs the 
test tone.

Select “Default”, then press [ENTER] to reset 
“Channel Level” setting to the default.

Delay Time
This is a parameter for 
optimizing the timing 
at which the sound  
outputs from the 
speakers according to 
the distance from the 
listening position.

Set the desired measure system. This measure 
system will be used for “Delay Time” setting. 
Press [ENTER] to switch the settings.

0ft to 60ft (12ft*)
(0 m to 18 m (3.6 m*))

Select the distance from the listening position 
to the speaker to get the ideal delay time.

0ft to 60ft (12ft*)
(0 m to 18 m (3.6 m*))

0ft to 60ft (10ft*)
(0 m to 18 m (3.0 m*))

0ft to 60ft (10ft*)
(0 m to 18 m (3.0 m*))

Select “Default”, then press [ENTER] to reset 
“Delay Time” setting to the default.

E5K40UD_EN.book  Page 40  Wednesday, December 24, 2008  11:15 AM