Fujitsu CONNECT2AIR AP-600RP-USB User Manual
CONNECT2AIR™ WLAN AP-600RP-USB
Page 23 / 62
8.2 System
Status
This section shows the AP’s working status:
•
AccessPoint properties
The wireless network name is displayed.
The wireless network name is displayed.
•
Wide Area Network (WAN)
The status of the WAN port will be displayed as well as the connection type.
The status of the WAN port will be displayed as well as the connection type.
•
Local Area Network (LAN)
The IP address, DHCP server and the firewall status are displayed
The IP address, DHCP server and the firewall status are displayed
•
Wireless Settings (WLAN)
If enhanced security has been set, it will be displayed. The Access Control displays the
status of the WLAN access possibilities – for example, WEP, 802.1x or Radius.
If enhanced security has been set, it will be displayed. The Access Control displays the
status of the WLAN access possibilities – for example, WEP, 802.1x or Radius.
•
Printer Status
Possible values for the printer status include “Ready”, “Not ready”, and “Printing…”.
Possible values for the printer status include “Ready”, “Not ready”, and “Printing…”.