Corinex Global Corinex GameNet User Manual

Low Red

OFF (Standby)

Adapter is in Standby mode

Red

ON

If Powerline link, Estimated application 
Throughput < Threshold 1

Orange

ON

If Powerline link, Threshold 1 < 
Estimated application Throughput < 
Threshold 2

Green

ON

If Powerline link, Estimated application 
Throughput > Threshold 2

Rotating rapidly in red, 

orange and green

ON

Adapter is on OBUS configuration Mode

The low and high throughput thresholds are default to be 6 Mbps and 12 Mbps 
respectively, and can be redefined by users through the web interface.

When an Ethernet link is detected this LED will turn ON.
When there is an Ethernet link and there is Ethernet traffic on the link, the LED will 
flash.

 

2.  After five seconds, the VPI LED will switch ON again. 

 
 

3. At this time, the adapter resets its configuration to the factory default

 

  settings and automatically restarts. 

The significant factory settings in the AV200 Wall Mount F are presented below: 
 
 

• Default IP is 10.10.1.69 

 

• Default configuration password is “paterna” 

 

• Default factory reset password is “betera” 

 

• Default network ID is the public network ID 

 

• Default Encryption Key is none.