Corinex Global Corinex GameNet User Manual

 6. 

Click 

the 

OK button in the TCP/IP Properties window to complete the PC 

    configuration, and click Close or OK to close the Network window.

  1. Go to the network screen by clicking the Start button. Click Settings and 
  then 

Control Panel. From there, double-click the Network icon. 

 2. 

On 

the 

Configuration tab, select the TCP/IP line for the applicable Ethernet 

    adapter. Do not choose a TCP/IP entry that mention DUN, PPPoE, VPN, or 
 

  AOL names. If the word TCP/IP appears by itself, select this line. If there is no 

    TCP/IP line listed, please refer to your Ethernet Adapter’s User Guide on 
    how to install TCP/IP protocol. Click the Properties button.

 

3.  If you do not have DHCP server on the network, then select Use the following 

address. Set the IP address manually in the format 10.10.1.X 

    (e.g. 10.10.1.200) and mask 255.255.0.0 of local TCP/IP settings and click the 
    OK button.

 4. 

Click 

the 

OK button again. Windows may ask you for the original Windows 

    installation disk or additional files. Supply them by pointing to the correct file 
 

  location, e.g., D:\win98, D:\win9x, c:\windows\options\cabs, etc. (if “D” is the 

    letter of your CD-ROM drive).

  5. Windows may ask you to restart your PC. Click the Yes button. If Windows 
    does not ask you to restart, restart your computer anyway.

  1. You have to be logged in as root in order to change the IP address in your 
  Linux 

system. 

  2. Enter the console if you are using a graphical user interface (KDE, 
  Gnome). 

  3.  To change the IP address to 10.10.1.200, enter the command: 

  and 

press 

Enter. The previous command takes eth0 as the name of the 

    Ethernet interface and may be different on your system. You can check the 
    status of all network interfaces by executing the command ifconfig on the 
  console.