Fostex PD606 User Manual
112
Location Recorder Model PD606
Chapter 6: Advanced operations
The file copy function copies an audio file recorded on a DVD-RAM disk (or hard disk partition)
to another DVD-RAM disk (or hard disk partition).
To execute the file copy function, use the “File copy” menu item in the “DISK UTILITY” menu of
the MENU mode.
to another DVD-RAM disk (or hard disk partition).
To execute the file copy function, use the “File copy” menu item in the “DISK UTILITY” menu of
the MENU mode.
File copy function
SHIFT
FILE SEL
DRV,PAT.
Selecting source drive
Before executing file copy, select the desired copy source as the current drive (DVD multi
drive or a hard disk partition).
drive or a hard disk partition).
<Note>:
You can make file copy to a DVD-R, DVD-RW, CD-R or CD-RW disk, as well as a
DVD-RAM disk. However note that you cannot use DVD-R/RW and CD-R/RW discs for
normal recording. You can use them only when you make audio file copy from a hard disk
partition. Also note that you cannot make file copy to a recorded DVD-R/RW or CD-R/RW
disk because file copy to a disk is made in disc-at-once mode.
normal recording. You can use them only when you make audio file copy from a hard disk
partition. Also note that you cannot make file copy to a recorded DVD-R/RW or CD-R/RW
disk because file copy to a disk is made in disc-at-once mode.
<Note>:
When you select a hard disk partition as the copy destination, you cannot make
file copy from a DVD-R/RW or CD-R/RW disk, though you can do it from a DVD-RAM disk.
<Important note>:
When you execute file copy to a DVD-R/RW or CD-R/RW disk, you
must select a hard disk partition as the current drive before you set a DVD-R/RW or
CD-R/RW disk.
CD-R/RW disk.
<Note>:
You can also bring up the "DRIVE SEL" screen by the procedure below.
1)
While the unit is stopped, press the [SHIFT] key to light [SHIFT] indicator,
followed by the [ENTER/YES] key.
followed by the [ENTER/YES] key.
2)
Use the [MENU] dial to select “DRV/PAT SEL” and press the [ENTER/YES] key.
The display now shows the “DRIVE SEL” screen.
DVD-RAM disk
Hard disk partition
Hard disk partition
Hard disk partition
1)
While the unit is stopped, press the [SHIFT] key to light [SHIFT] indicator, followed by the
[FILE SEL/DRV.PAT] key.
[FILE SEL/DRV.PAT] key.
The display shows the “DRIVE SEL” screen. In this screen, “DVD” represents the
DVD multi drive, while “PT01” through “PT16” represent the hard disk partition.
DVD multi drive, while “PT01” through “PT16” represent the hard disk partition.
2)
Use the [MENU] dial to select the desired drive and press the [ENTER/YES] key.
The display changes to show the Home screen for the selected partition.