Fostex PD606 User Manual
154
Location Recorder Model PD606
Chapter 8: MENU mode/SYS SETUP menu
<Note>:
If you execute pre recording at 88.2k or 96k, the pre recording time auto-
matically reduces to half the selected value. If you execute pre recording at 176.4k
or 192k, the pre recording time automatically reduces to quarter the selected value.
For example, if the pre recording time is set to ten seconds at 88.2k Fs recording, the
buffer stores only five seconds of audio data. If the pre recording time is set to ten
seconds at 192k Fs recording, the buffer stores only 2.5 seconds of audio data.
or 192k, the pre recording time automatically reduces to quarter the selected value.
For example, if the pre recording time is set to ten seconds at 88.2k Fs recording, the
buffer stores only five seconds of audio data. If the pre recording time is set to ten
seconds at 192k Fs recording, the buffer stores only 2.5 seconds of audio data.
Pre recording time setting [Pre rec time]
The “Pre rec time” menu item sets the pre recording time of audio pooled in the buffer.
When starting recording while the Pre rec mode is set to “On”, recording is made from the
audio pooled in the buffer. The prevents missing the start of a take. The setting is stored to the
Flash ROM of the unit.
When starting recording while the Pre rec mode is set to “On”, recording is made from the
audio pooled in the buffer. The prevents missing the start of a take. The setting is stored to the
Flash ROM of the unit.
Selectable between “1sec.” and “10sec.” in one second steps (the default is “10sec.”).
Options
1)
While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the
[ENTER/YES] key.
2)
While “SYS SETUP” is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
5)
Press the [EXIT] key repeatedly until you exit the MENU mode.
4)
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm
your setting.
3)
Use the [MENU] dial to select the “Pre rec time” menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
Flashing