Fostex PD606 User Manual
166
Location Recorder Model PD606
Chapter 8: MENU mode/SYS SETUP menu
• Input clip On/Off setting
Use the [MENU] dial to select the “Input clip” and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
The current setting starts flashing and you can now select the desired option.
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to
confirm your setting.
confirm your setting.
Flashing
• BATT warning On /Off setting
Use the [MENU] dial to select the “BATT warning” and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
The current setting starts flashing and you can now select the desired option.
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to
confirm your setting.
confirm your setting.
If the peak indicator lights due to input overload during ana-
log recording or clipping of stereo buss while you set "Input
clip" to "On", the warning tone is output by the pattern on
the right.
log recording or clipping of stereo buss while you set "Input
clip" to "On", the warning tone is output by the pattern on
the right.
You can select between “On” and “Off” (the default is “On”).
Options
If the battery voltage drops below the threshold voltage set
by the "BATT. warning" (BATTERY SETUP) menu item while
you set "BATT warning" to "On", the warning tone is output
by the pattern on the right.
If the warning tone above is output during recording, re-
cording automatically stops after one minute.
by the "BATT. warning" (BATTERY SETUP) menu item while
you set "BATT warning" to "On", the warning tone is output
by the pattern on the right.
If the warning tone above is output during recording, re-
cording automatically stops after one minute.
You can select between “On” and “Off” (the default is “On”).
Options
Flashing
<Note>:
For details about how to set the battery threshold voltage for warning, see
"Battery warning setting" on page 172.