Fostex PD606 User Manual
179
Location Recorder Model PD606
Chapter 8: MENU mode/BATTERY SETUP menu
<Note>:
When batteries are linked (using PowerLink batteries), the
average value calculated by the batteries is shown.
The "BATT. status" item displays the information of a battery with BMS (Battery Management
System).
System).
Battery status [BATT. status]
3)
Use the [MENU] dial to select "BATT. status" menu item and press the [ENTER/YES] key.
The unit reads BMS battery data and displays the following information.
<Note>:
When the battery priority is set by the "Active battery"
item, the remaining time of the prior battery is shown. When the
active battery changes, the remaining time of the other battery is
shown.
active battery changes, the remaining time of the other battery is
shown.
Shows the remaining time until the battery voltage reaches the threshold low volt-
age in one minute steps.
age in one minute steps.
The currently used battery is highlighted.
Battery voltage is shown.
For a non-BMS battery, the value is measured by the CPU of the PD606.
For a non-BMS battery, the value is measured by the CPU of the PD606.
Battery current is shown.
For a non-BMS battery, "--A" is shown.
For a non-BMS battery, "--A" is shown.
Battery capacity is shown.
For a non-BMS battery, "--%" is shown.
For a non-BMS battery, "--%" is shown.
Shows whether battery PowerLink is on or off.
* Only when the battery is active, "ON" is shown.
For a non-BMS battery, "---" is shown.
* Only when the battery is active, "ON" is shown.
For a non-BMS battery, "---" is shown.
BATT. Remain
BATT1/BATT2
VOLTS
AMPS
CAP.
PLK.
1)
While the unit is stopped, press the [SHIFT] key followed by the [ENTER/YES] key.
2)
Use the [MENU] dial to select the "BATTERY SETUP" menu and press the [ENTER/YES] key.
The display shows the screen for battery-related settings.
4)
Press the [EXIT] key repeatedly until you exit the MENU mode.
<Note>:
When a non-BMS battery is active, "--h --m" is shown. When
[DC-IN] is active, "<DC-IN>" is shown.