Fostex PD606 User Manual
192
Location Recorder Model PD606
Chapter 8: MENU mode/TC SETUP menu
Using the "RepTC Ubit" menu item, you can select the desired userbit of time code which is
output from the [TIME CODE OUT] connector while the [Sel TC Out] is set to "Repro".
output from the [TIME CODE OUT] connector while the [Sel TC Out] is set to "Repro".
<Note>:
Date information (year, month and day) shows the original date of an audio
file. The event number, reel number, scene number, and take number must be set
using the appropriate menu items in advance.
using the appropriate menu items in advance.
EEEEERRR
MMDDYYff BG_76: MM (month)/BG_54: DD (day)/BG_32:YY (year)/BG_10: ff (US)
BG_76543: EEEEE / BG_210: RRR (default setting)
3)
Use the [MENU] dial to select the desired TC userbit, and press the [ENTER/YES] key to
confirm your selection.
confirm your selection.
SSSSSSRR
RRREEEEE BG_756: RRR / BG_54321: EEEEE
BG_756432: SSSSSS / BG_10: RR
DDMMYYff BG_76: DD (day)/BG_54: MM (month)/BG_32:YY (year)/BG_10: ff (EUR)
SSSSSSTT BG_756432: SSSSSS / BG_01: TT
<BWF UBIT>
Outputs the userbit in the BWF descriptor information.
EEEEE:EVENT No:
Only the lower five figures of the numeral information in the event information
recorded on BWF are output from the rightmost five digits of the user bit fields.
recorded on BWF are output from the rightmost five digits of the user bit fields.
RRR:REEL No:
Only the lower three figures of the reel number recorded on BWF are output from
the rightmost three digits of the user bit fields.
RR:REEL No:
Only the lower two figures of the reel number recorded on BWF are output from
the rightmost two digits of the user bit fields.
the rightmost two digits of the user bit fields.
SSSSSS:SCENE No: Only the lower six figures of the scene number recorded on BWF are output from
the rightmost six digits of the user bit fields.
TT:Take No:
Only the lower two figures of the take number recorded on BWF are output from
the rightmost two digits of the user bit fields.
the rightmost two digits of the user bit fields.
ff:
File No (in decimal, 01 to 99)
UBIT setting of playback time code [RepTC Ubit]
4)
Press the [EXIT] key repeatedly until you exit the MENU mode.
2)
Use the [MENU] dial to select the “Rep TC Ubit” menu item, and press the [ENTER/YES] key.
The currently selected time code userbit flashes (the default is "EEEEERRR"). You can
now select the userbit.
now select the userbit.
1)
When the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the
[TIME/TC SET] key.
[TIME/TC SET] key.
The display now shows the TC SETUP menu screen.
flashing