Fostex PD606 User Manual
211
Location Recorder Model PD606
Chapter 8: MENU mode/DISK UTILITY menu
Using the "Part. protect" menu item, you can select "On" or "Off" of the software protection
(record inhibit) for the current partition.
The following procedure assumes that a partition you want to make protection setting is se-
lected as the current drive.
(record inhibit) for the current partition.
The following procedure assumes that a partition you want to make protection setting is se-
lected as the current drive.
Partition protection On/Off setting [Part. protect]
<Note>:
When a protected partition is loaded, the " " icon is shown on the Home display
as well as the DRIVE SEL display as shown below.
<Note>:
If a partition is not selected as the current drive, "---" is shown.
4)
Use the [MENU] dial to select "On" or "Off", and press the [ENTER/YES] key to confirm your
setting.
setting.
5)
Press the [EXIT] key repeatedly until you exit the MENU mode.
3)
Use the [MENU] dial to select the "Part. protect" menu item and press the [ENTER/YES] key.
The current option ("On" or "Off") starts flashing (the default is "Off") and you can now
select the desired option.
select the desired option.
1)
While the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by
the [ENTER/YES] key.
the [ENTER/YES] key.
The unit enters the MENU mode and the MENU list screen is shown.
2)
Use the [MENU] dial to select the “DISK UTILITY” menu and press the [ENTER/YES] key.
The display now shows the DISK UTILITY menu screen.
Flashing