Fostex PD606 User Manual
37
Location Recorder Model PD606
Chapter 2: Preparation before using the PD606
You can replace the internal hard disk drive with the optional Model EX-HD1 hard disk drive by
following the procedure below.
following the procedure below.
Replacing the internal hard disk drive
1)
Loosen the four fixed screws around battery mount 1 and remove the panel.
The internal hard disk drive appears as indicated in the figure below.
<Note>:
Before you replace the hard disk drive, turn off the power and remove the AC
adaptor (or battery). Handle the optional and internal hard disk drives gently and care-
fully because they contain precision parts.
fully because they contain precision parts.
Fixed screw 1
<Note>:
When you use the unit vertically with the front panel down, put the unit on a soft
fabric, etc. and fix the unit so that it does not fall down.
Internal hard disk drive
2)
Loosen the two fixed screws which fixes the hard disk drive and remove the hard disk drive.
The fixed screws are not removed. Grip the screw heads by fingers and pull out the hard
disk drive. The drive is connected to the connector inside so take great care for pulling it
out.
disk drive. The drive is connected to the connector inside so take great care for pulling it
out.
Optional hard disk drive (Model EX-HD1)
<Note>:
The optional hard disk is formatted when
shipped so you do not have to format it after mounting
it to the PD606.
it to the PD606.
Fixed screw 2
Fixed screw 3
Fixed screw 4