Fostex PD606 User Manual

Location Recorder  Model PD606

Chapter 3: Names and Functions

Each of the following screen examples is the screen which appears when an audio file
recorded on a DVD-RAM disk or the internal hard disk is loaded.
Depending whether or not at least any one track is armed, the Home screen looks slightly
different, as shown below.

Current drive/file number

This area shows the time value of the current file position in "ABS" or "LTC".
It also can show an external time code value or internal generator time code value. You can
switch the time display mode in the following order by pressing the [TIME/TC SET] key.

Shows LTC recorded on the disk. You can set the start time of LTC recording using the TC
SETUP menu of the MENU mode.

Shows incoming external LTC and the frame rate. If no LTC is received, "----------" is shown.

Shows the absolute time, which is set to "00H 00M 00S 00F" at the beginning of the file.

Shows time code generated by the internal TC generator.
The value depends on the setting of the "Gen mode" item in the TC SETUP menu of the MENU
mode.

Shows the user bit information of playback time code.

The Home screen displays information for audio file, settings, etc.

<When no track is armed>

Time display

Status information

File name

Remaining

Protect icon

<When at least one track is armed>