Fluke HART 744 User Manual

Cloning a Transmitter

19

Cloning copies the Basic Setup information from one
transmitter to another. You can clone generic and
supported transmitters.

To use the calibrator to clone a transmitter:

1.  Connect the calibrator to the transmitter you want to

clone. You only need a communication connection.

2.  From the Active Device screen, press the 

softkey.

3. Use 

the 

u

 or 

d

 keys to select 

 from the list on

the screen and press 

e

.

 

 

pe09s.bmp

4. Press 

the 

 softkey to load the settings into

the calibrator’s memory (not the transmitter).

5.  Disconnect the calibrator from the transmitter and

connect it to the transmitter you want to configure.
Press the 

 softkey to establish communication.

6.  Press the 

 softkey, then select 

 to return to

the Basic Setup screen.

7.  Press the 

 softkey to refresh the calibrator

display with the cloned parameter settings. The
settings are not transmitted to the transmitter at this
time.

8.  Use the 

u

 or 

d

 and 

e

keys to select

parameters one at a time, change them, or leave them
as cloned,  and press the 

 softkey to transmit

them to the transmitter.