Fluke Car Amplifier 5220A User Manual
6-1
Section 6
Option and Accessory Information
6-1. Introduction
This section of the manual documents the options and accessories available for use with
the 5220A. Currently, there are no options, and the accessories are limited to a choice of
two rack-mounting kits and a precision current shunt for calibration purposes. Each is
described in the following accessories subsection.
the 5220A. Currently, there are no options, and the accessories are limited to a choice of
two rack-mounting kits and a precision current shunt for calibration purposes. Each is
described in the following accessories subsection.
6-2. Accessories
6-3.
Rack Mounting Kit (M08-205-600)
The 5220A can be rack mounted in a standard 19-inch equipment rack using Rack
Mounting Kit M08-205-600. Use the following procedure to install the kit:
Mounting Kit M08-205-600. Use the following procedure to install the kit:
1.
Peel off the name plate decals from the front side corners of theinstrument.
2.
Remove the front corner screws that match the hole pattern in the rack mounting ears
(see Figure 6-1).
(see Figure 6-1).
3.
Attach the rack mounting ears to the front corners of the unit using the screws
supplied in the rack mounting kit.
supplied in the rack mounting kit.