Coby CX-R60 User Manual

Page of 16
Page 1 
Coby Electronics Corporation
www.cobyusa.com 
Page 1
Making a Recording
A cassette should be loaded in the Cassette Compartment. The side that 
will be recorded to should face out and be visible through the Cassette 
Compartment window.
Press 
 and 
 together to start recording. The Record Indica-
tor be lit during recording.
Speak  into  the  integrated  microphone  located  at  the  top  of 
the  recorder.  If  you  have  connected  an  optional,  external  mi-
crophone  to  the  Microphone  In  jack  located  at  the  top  of  the 
recorder, the integrated microphone will be disabled.
Set the PAUSE switch to the “On” position to pause recording.  
Return  the  PAUSE  switch  to  the  “Off”  position  to  resume  re-
cording.
If the VAS (Voice Activated System) switch is set to the “On” 
position, the recorder will pause recording automatically when 
no sound is detected.
Press 
 to stop recording.
If a cassette is loaded but the 
 button is locked, make 
sure that the record protection tab has not been removed from 
the top of the cassette tape. 
Setting the Record Speed
Set the SPEED switch to the “Nor” (normal) position to record at a 
normal speed. The available recording time will be the same as the 
rated recording time of a cassette tape.
 Set the Speed switch to the “Low” position to record at a lower speed. 
This will double the available recording time of a cassette tape (tapes 
rated for 90 minutes will be extended to 180 minutes).
1.
3.
OPERATION