Fitness Quest EDGE 284 User Manual
6
STEP 4 – Handlebar Installation
a) Attach Handlebar to Seat Adjustment
Tube under Seat with the two Assembly
Knobs. Place Knob Caps on threaded
end of Knobs.
Knobs. Place Knob Caps on threaded
end of Knobs.
Note: Do not pinch the wires.
b) Attach Handlebar Pulse Wire to Long
Extension Wire coming from the Frame.
STEP 3 – Back Support Frame
Tube Installation
a) Attach Back Support Frame Tube to Seat
Adjustment Tube with 3/8” x 135mm Hex
Bolt and 3/8” Nylon Nut.
Bolt and 3/8” Nylon Nut.
b) Lay bike on its side and attach two M8 x 30mm
Allen Bolts and two M8 Washers to the underside
of the bottom Seat Cushion.
of the bottom Seat Cushion.
Figure 4- Install Handlebar
Figure 3a - Install Back Support Frame Tube
Figure 3b - Attach Bolts and Washers to
the bottom of the Seat Cushion
seat
adjustment
tube
assembly
knob
handlebar
knob
cap
long
extension wire
handlebar
pulse
wire
pulse
wire
frame
back support
frame tube
3/8”
nylon
nut
seat adjustment
tube
3/8” x 135mm
hex bolt
M8 x 30mm
allen bolts
M8 washer
M8 washer
seat
cushion