Clarion VZ401 Owner's Manual

English

VX401/VZ401

English

Owner’

s Manual

Radio Operations

Preset Scan

The Preset Scan receives the stations stored in
the preset memory in order. This function is
useful when searching for the desired station in
memory.
1. Touch the

[Band] key to select the desired

band. (FM or AM).
. Touch the

[List] key to display the Preset

List screen.
. Touch the

[PS] key to start the Preset Scan.

  The unit starts scanning each station for 10
  seconds sequentially. Presets with a weak
  signal will be skipped.

4. When the desired station is tuned in, touch
the

[PS] key again to continue receiving that

station.

LOC/DX Setting

The DX / LOC setting changes the tuner
sensitivity in order to separate closely spaced
stations. This feature is useful in areas that
have many radio stations in close proximity.
1. Touch the

[List] key to display the Preset

List screen.
. Touch the

[DX] key to switch to DX

tuner sensitivity.
. Touch the

[LOC] key to switch to Local

tuner sensitivity.

DVD Video Player Operations

Change DVD System Settings
Note:

If the set up operation is performed in

the middle of DVD video play, the disc
will restart from the beginning.
Selecting DVD Set Up Menu

1. Touch the

[Settings] key on the Main

Menu to access the Video set up menu.
. Touch the

[Video] key. The video menu is

displayed.

Setting up the Screen Size

1. Touch the

[Aspect Ratio] key in the Video

sub menu to change the screen size.
. Touch the desired aspect ratio:

4:3 or 16:9.

The factory default setting is “

16:9 ”.

•  When watching a wide type through a
  conventional type of the rear view monitor
  (4:), the leftmost and rightmost areas of the
  screen are cut off.

  This function allows displaying the important
  part of image fully on the screen. In some
  cases, image is displayed while being panned
  (scrolled).

•  When watching a wide type through a wide
  type of the rear view monitor (16:9),
  the leftmost and rightmost areas of the
  screen are not cut off.

Setting up the Video System Format

1. Touch the

[Aux IN] key in the Video sub

menu to set up the video system format.
. Touch the required format :

Auto, PAL or

NTSC.

The default setting is

Auto.

Setting up the AUX Input Sensitivity

1. Touch the

[AUX Input SW] key in the Video

sub menu to set up the sensitivity level.
. Touch the desired sensitivity level displayed:

Low, Mid or High.

The default setting is

Mid.

VX_VZ401 081210 R4 _EN.indd 21

9/10/2010 8:01:56 AM