Clarion VZ401 Owner's Manual

4 

         

VX401/VZ401

English

Owner’

s Manual

Power does not turn on. (No sound 

is produced.)

Fuse is blown.

Replace with a fuse of the same 

amperage. If the fuse blows again, 

consult your store of purchase.

Incorrect wiring.

Consult your installation center.

Nothing happens when buttons are 

pressed. 

Display is not accurate.

The microprocessor has malfunc-

tioned due to noise, etc.

Press the reset button with a thin 

rod. 

* When the Reset button is 

pressed, frequencies of radio sta-

tions, titles, etc. stored in memory 

are cleared. 

The remote control unit does not 

work.

Direct rays of the sun fall on the 

light-receptive part of the remote 

control unit.

When direct rays of the sun fall 

on the light-receptive part of the re-

mote control unit, it may not work.

The battery of the remote control 

unit is dead or there is no battery in 

the remote control unit.

Check the battery of the remote 

control unit.

Disc cannot be loaded.

A disc is already loaded.

Eject the disc before loading the 

new one.

There is foreign matter already in 

the disc slot.

Remove the foreign matter, or 

consult a service station.

Sound skips or is noisy.

Disc is dirty.

Clean the disc with a soft cloth.

Disc is heavily scratched or 

warped.

Replace with a disc in good condi-

tion.

Sound is bad directly after power is 

turned on.

Condensation may form on the 

internal lens when the car is parked 

in a humid place.

Let dry for about 1 hour with the 

power on.

Video images are not displayed.

The parking brake is not engaged.

Check that the parking brake is 

engaged.

Disc cannot play with the 

display “

PARENTAL VIOLATION” 

shown.

Feature exceeds set parental level.

Release the view limitation or 

change the parental level. 

See the subsection “Setting up the 

parental level”

VX_VZ401 081210 R4 _EN.indd   42

9/10/2010   8:02:28 AM