Clarion NX404 Quick Setup Guide
29
NX404
English
English
Quick start guide
Installing the Main Unit in TOYOTA Vehicle
Install by using parts attached to the vehicle. (Screws marked are attached to the
vehicle.)
vehicle.)
8- Hexagonal screws
(M5x8)
Mounting bracket
(1 pair for the left and
right sides)
right sides)
Center Panel
(*1)
(*2)
*1. Some panel openings are too small for the unit depending on the vehicle type
and model. In such a case, trim the upper and lower sides of the panel frame by
about 0.5 to 1.5 mm so the unit can be inserted smoothly.
and model. In such a case, trim the upper and lower sides of the panel frame by
about 0.5 to 1.5 mm so the unit can be inserted smoothly.
*2. If a hook on the installation bracket interferes with the unit, bend and flatten it
with a nipper or similar tool.
with a nipper or similar tool.
Typical Mounting Brackets
Example 1
Example 2
Affix the screws to the marks.
Example 3
Main Unit
Note:
• Before installing, be sure to disconnect the negative cable of the
car battery.
• In the optional devices, the RCA cables and the Connector
cables are separately-sold items.
•
When connect the HDMI cable, be sure to fix with the HDMI cable holder
and Machine screw(M2 x 4).
NX404
CAMERA
VIDEO OUT
REAR RCH
REAR LCH
AUX2 VIDEO IN
AUX2 AUDIO IN LCH
MIC
Red
Red
White
White
Yellow
Yellow
Yellow
CCA-750(sold separately)
4-Channel Amplifier
Red
Front
Right
Front
Left
Rear
Left
Rear
Right
Red
Red
White
White
Gray
Black
Gray
Black
White
SWI
SUBWOOFER1
SUBWOOFER2
AUX2 AUDIO IN RCH
HDMI CABLE
For Rear zone
Refer to
page 31
page 31
WIRE CONNECTIONS
HDMI cable holder
NX404_quick start guide_EN_InDesign.indd 29
2014-1-14 14:18:45