Clarion Plug and Play Receiver User Manual
SIRPNP
23
Changing the lock code
1.
Press MENU.
2.
Rotate the Encoder knob to highlight Lock
Options.
Options.
3.
Press the Encoder knob to select Lock Options.
4.
Rotate the knob to highlight Edit Code.
5.
Press the knob again.
6.
Enter the default code “0000” (or the lock code
you previously defined).
you previously defined).
The New Code prompt appears.
7.
Enter the new four-digit code using the keypad
buttons.
buttons.
The unit prompts you to confirm the code.
8.
Enter the new four-digit code again.
You have changed the lock code.
Audio Level Options
This option adjusts the audio level indication and
audio gain (the increased level of a sound that
results from amplifying the input signal).
audio gain (the increased level of a sound that
results from amplifying the input signal).
When you select this option, a 10-segment
horizontal bar graph with a minus (-) at the left end
and a plus (+) at the right end indicates the current
setting.
horizontal bar graph with a minus (-) at the left end
and a plus (+) at the right end indicates the current
setting.
Rotate the Encoder knob to adjust the bar graph
and press the Encoder knob when finished.
and press the Encoder knob when finished.
Antenna Aiming (Home Installation)
To receive a good signal requires a direct line of
sight between you and the satellite. If your reception
is poor, moving the antenna may help. This option
confirms that the antenna is in the best position to
receive the satellite signal.
sight between you and the satellite. If your reception
is poor, moving the antenna may help. This option
confirms that the antenna is in the best position to
receive the satellite signal.
1.
Press MENU.
Clarion_SIRIUS_PnP_Shuttle_Users_Guide.book Page 23 Friday, March 12, 2004 3:51 PM