Clarion Plug and Play Receiver User Manual
User’s Guide
30
Description
Probable Cause
Remedy
The Plug and Play receiver does
not turn on.
not turn on.
The power cable may not be
properly connected.
properly connected.
The fuse may be blown.
Check power cable and fuse.
The LCD displays, “Check
antenna”.
antenna”.
The satellite antenna is not
connected.
connected.
Check the antenna connection to
the Plug and Play receiver.
the Plug and Play receiver.
The antenna or its cable is faulty.
Contact the system installer or
vendor.
vendor.
Reception is marred by audio static
or loss of clarity.
or loss of clarity.
The FM frequency contains static.
Switch to another FM frequency.
The vehicle’s antenna is not
connected to the radio.
connected to the radio.
Check the vehicle antenna cable.
There’s no signal on the Plug and
Play receiver’s display.
Play receiver’s display.
Check for obstacles over or around
the antenna.
the antenna.
Change your location to eliminate
nearby obstacles, such as bridges
and tall buildings.
nearby obstacles, such as bridges
and tall buildings.
5. Troubleshooting
Clarion_SIRIUS_PnP_Shuttle_Users_Guide.book Page 30 Friday, March 12, 2004 3:51 PM