Clarion CZ702 Car CD/MP3 Player CZ702 User Manual

English

10

CZ702

HD  Radio  Technology  allows  CD-quality 

digital broadcasting of your local AM and 

FM  radio  stations.  HD  Radio  broadcasts 

can include multiple channels on the same 

frequency, which is called multicasting. With 

multicasting,  you  can  receive  up  to  eight 

additional multicast channels: HD1~HD8. 

With  an  HD  Radio  tuner  connected,  you 

will  receive  HD  Radio  digital  broadcasts 

automatically when tuned to a station that 

offers HD Radio Technology. 

Press  the  [

SRC  / 

  ]  button  on  the  front 

panel or remote control to switch to the 

 source, and HD icon will illuminate.

Press  the  [

]  button  to  change 

between three FM and one AM bands. Each 

band stores up to six preset stations.

Press and hold the [

] or [

] button to 

seek the next/previous station automatically. 

Press the [

] or [

] button to move the 

radio  frequency  number  up  or  down  one 

step.

To tune to an HD Radio multicast channel, 

tune to the main signal and then press the 

[

] button on the panel. PTY and 

SUB CH are displayed. Select PTY or SUB 

CH by rotate [

] knob and push to 

confirm.

•    Select PTY type from the category list by 

rotate [

] knob and push.

•    Select SUB CH by rotate [

] knob 

and push.

•   Multi  channel  is  available  when  a  digital 

signal is detected, the DIGITAL icon will 

illuminate.  If  the  digital  signal  becomes 

unavailable, the unit will revert to Analog 

reception.

Up  to  six  stations  on  each  band  can  be 

stored as presets, which can then be instantly 

recalled  by  pressing  the  associated  preset 

button. To store a station, turn the radio on 

and select the desired band and station. Press 

and hold the desired preset button (numbered 

one through six on the face of the radio or 

remote control) for more than 1 second. When 

stored, the preset number will appear in the 

display. The station is now stored and can be 

recalled by pressing the corresponding preset 

button. Repeat for the remaining five presets 

on the current band and for presets on the 

other four bands.

Press the [

] button to scan and play all 

preset stations for 10 seconds each. Press 

[

] again to stop scanning and play the 

current station.

Be careful not to press and hold the [

PS/AS] 

button for 1 second or longer, otherwise the 

auto store function is engaged and the unit 

starts storing stations. 

Press and hold the [

] button (1 sec.) to 

select six strong stations and store them in the 

FM3 or AM band using the Auto Store feature. 

After entering the stations into memory, the 

unit will automatically stop at each station for 

five seconds, allowing you to preview each 

selection. When using the Auto Store feature, 

the new stations replace any stations already 

stored in preset memory.

You can stop the Auto Store function at any 

time by pressing the [

] button again.

Press 

 button once or more to enter 

 mode.

Press the 

 button on the panel or 

on the remote control to select one radio band 

among FM1, FM2, FM3, AM.

During manual tuning, the frequency will be 

changed in steps.

Press the

] or [

 button on the panel 

to tune in a higher / lower station.

Press the 

] or [

 button on the remote 

control to select preset stations.

Press and hold the

 ] or [ 

 button  to 

seek a higher / lower station.

To stop searching, repeat the operation above 

or press other buttons having radio functions.

When a station is received, searching stops 

and the station is played.

Preset  scan  receives  the  stations  stored 

in  preset  memory  in  order.  This  function  is 

useful when searching for a desired station in 

memory.

1.  Press the 

 button.

2.   When a desired station is tuned in, press 

the 

  button  again  to  continue 

receiving that station.

Be  careful  not  to  press  and  hold  the 

 button for 1 second or longer, otherwise 

the auto store function will begin and the unit 

starts storing stations.

Only stations with sufficient signal strength will 

be detected and stored in the memory.

Press and hold the 

 button (1 sec.) to 

start automatic station search.

To stop auto store, press other buttons 

having radio functions.

1. After auto store, the previous stored 

stations will be overwritten.

2. The unit has 4 bands, such as FM1, FM2, 

FM3 and AM. FM3 and AM can store 

by AS function. Each band can store 6 

stations, CZ702 can store 24 stations 

in total.

When one expected radio station has been 

detected, press and hold number button 1-6 

to store it in the memory.

Press one numeric button among 1 to 6  on 

the panel to select the corresponding stored 

station.

When LOCAL seeking is ON, only those 

radio 

stations with strong radio signal could 

be received.

To select LOCAL function, press and hold 

the 

 button on the front panel, then 

press 

 button repeatedly until 

LO or 

displays on the screen, and rotate the 

knob to select Local or Distant 

mode.

The  number  of  radio  stations  that  can  be 

received will decrease after the local seeking 

mode is ON.