Clarion CZ702 Car CD/MP3 Player CZ702 User Manual

English

4

CZ702

•   T h e   U S B   m e m o r y   s t i c k s   m u s t   b e 

recognized as “USB mass storage class“ 

to work properly. Some models may not 

operate correctly.

   When using an USB memory stick, we 

recommend that you backup your data 

stored  on  it  before  using  a  personal 

computer etc.

•   Data  files  may  be  broken  when  using 

USB  memory  sticks  in  the  following 

situation: When disconnecting the USB 

memory  stick  or  turning  the  power  off 

during reading data.

   When  affected  by  static  electricity  or 

electric noise.

   Connect/disconnect  the  USB  memory 

stick when it is not accessed.

•    Connecting  with  the  computer  is  not 

covered.

For a longer service life, be sure to read the 

following cautions.

•  Do not allow any liquids on the unit from 

drinks, umbrellas, etc. Doing so may 

damage the internal circuitry.

•  Do not disassemble or modify the unit in 

any way. Doing so may result in damage.

•  Do not let cigarettes burn the display. Doing 

so may damage or deform the body.

•  If a problem should occur, have the unit 

inspected at your store of purchase.

•  The remote control unit may not work if the 

remote control sensor is exposed to direct 

sunlight.

The control panel can be detached to prevent 

theft. When detaching the control panel, keep 

it in the safety place and prevent scratches.

W e   r e c o m m e n d   t a k i n g   t h e   D C P 

(DETACHABLE CONTROL PANEL) with you 

when leaving the car.

1.  Press the [

SRC / 

 ] button (1 sec.) to turn 

off the power.

2.  Deeply push in [

] button to unlock 

the DCP.

3.  Hold  the  side  popped  out,  remove  the 

DCP.

1.  Hold the DCP and ensure that the panel 

faces towards you. Set the right side of the 

DCP into the DCP bracket. 

2. Press the left side of the DCP until it locks.

Changes  or  modifications  to  this  product 

unapproved by the manufacturer will void the 

warranty and will violate FCC approval.

•  Use a soft, dry cloth and gently wipe off 

any dirt or dust. 

•  For tough dirt, apply some neutral 

detergent diluted in water to a soft cloth, 

wipe off the dirt gently, then wipe again 

with a dry cloth. 

•  Do not use benzene, thinner, car cleaner, 

etc., as these substances may damage 

the body or cause the paint to peel. Also, 

leaving rubber or plastic products in 

contact with the body for long periods of 

time may cause stains.

Hold the DCP, as shown in the figure below, 

and put it into the supplied DCP case. 

•   The  DCP  can  easily  be  damaged  by 

shocks. After removing it, be carefully not 

to drop it or subject it to strong shocks.

•   Once the [

] button is pressed and 

DCP is unlocked, car vibrations can cause 

the DCP to fall

•   The  connector  for  the  main  unit  and 

DCP is extremely important. Be careful 

not  to  damage  it  by  pressing  on  it  with 

fingernails, screwdrivers, etc.

If the DCP is dirty, wipe off the dirt with a soft, 

dry cloth only.

DCP case

DCP

CHINA

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 
(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, 
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED 
OPERATION.

THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I
SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.

CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN

This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.

MANUFACTURED:

PN:127070009937

TX-1096B-A

CZ702

FCC ID: AX2CZ702

QDID NO.: B017789