FIC A360 User Manual
Hardware Functional Overview
4.16 Micro-P Subsystem (PMU-07)
The micro controller Mitsubishi PMU07 acts as a supplement for the power management
control. It supports many functions via the SMBus interface.
The system communicates with the PMU07 via the SMBus interface. The SMBus host
(M38867) should be first initialized before starting the transaction. The following is the
procedure for system communication with PMU07:
control. It supports many functions via the SMBus interface.
The system communicates with the PMU07 via the SMBus interface. The SMBus host
(M38867) should be first initialized before starting the transaction. The following is the
procedure for system communication with PMU07:
1. Enable SMBus interface by writing 01h to SmbHstCfg register.
2. Get SMBus I/O port base address by reading from SmbBA register.
3. Clear SMBus status by writing 1Eh to SmbHstSts register.
4. Write the PMU07 slave address to SmbHstAdd register.
2. Get SMBus I/O port base address by reading from SmbBA register.
3. Clear SMBus status by writing 1Eh to SmbHstSts register.
4. Write the PMU07 slave address to SmbHstAdd register.
− Send command to PMU07 -- Slave address is 04h.
− Read data from PMU07 -- Slave address is 05h.
5. Write the desired command to SmbHstCmd register.
6. Write the desired parameters to SmbHstDat0(High byte) and SmbHstDat1(Low byte)
6. Write the desired parameters to SmbHstDat0(High byte) and SmbHstDat1(Low byte)
registers if the system wants to send command to PMU07.
7. Wait for SMBus interrupt occurred by monitoring SmbHstSts register INTR bit.
8. Get the desired data by reading from SmbHstDat0(High byte) and SmbHstDat1(Low
8. Get the desired data by reading from SmbHstDat0(High byte) and SmbHstDat1(Low
byte) registers if the system wants to read data from PMU07.
Features Summary of the Micro-P:
• 5 channels 8-bit analog to digital converter
• Timer0: 8-bit tuner/counter with 8-bit prescaler
• Timer1: 16-bit timer/counter. TMR1 can be incremented during sleep via external
• Timer1: 16-bit timer/counter. TMR1 can be incremented during sleep via external
crystal/clock
• Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
• Capture, Compare, PWM module
• Synchronous Serial port (SSP) with SPI and I
• Capture, Compare, PWM module
• Synchronous Serial port (SSP) with SPI and I
2
C
• Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI)
• Brown-out detection circuitry for Brown-out Reset (BOR)
• 2K bytes program memory
• 2K bytes program memory
• 128 bytes data memory
• 22 I/O pin
• 8 interrupt sources
4-16
FIC A360 Service Manual