FIC A360 User Manual

 

Maintenance & Disassembly 

4.  Underneath the palm-rest cover, you will see the glidepad module assembly. Remove the 

five screws on the glidepad converter board where the glidepad wire cable is connected. 

 

 

 

5.  When the converted board is removed, you can remove the select-button bracket casing 

covering the glidepad board. 

 
6.  Replace a new glidepad module and reverse the procedure to reassemble. 

 

5.5.4  Removing the Internal Hard Disk Drive 

The notebook provides a built-in hard disk for the primary IDE controller. The HDD is an 
industry standard 2.5” IDE disk drive with a maximum height of 9.5mm. 
  
1.  Find out the built-in hard disk secured with one screw at the upper right corner of the hard 

disk. Remove this screw and carefully pull the hard disk module from the connector. 

 

 

 

 

 

 
5-8 

FIC A360 Service Manual