FIC A360 User Manual

Page of 187
 
Software Functional Overview 
 
3-4 
FIC A360 Service Manual 
256MB NIL 
256MB 
256MB 64MB 
320MB 
256MB 128MB 
384MB 
256MB 256MB 
512MB 
NIL 64MB 
64MB 
NIL 128MB 
128MB 
NIL 256MB 
256MB 
3.3.3 Video 
The Video subsystem used share memory of Video memory. The system will support 
the true ZV port, the Microsoft Direct 3D assist, simultaneous display, monitor sense for 
auto display on boot and VESA Super VGA function call. 
Supported Video Mode 
The following is the display modes supported by the S3 Savega4 in LCD only, CRT 
only, and simultaneous mode. The VGA BIOS will allow mode sets of resolutions 
greater than the panel size but only show as much mode display as will fit on the panel. 
 
Panel Type Initialization 
The VGA BIOS will issue INT 15h function call during POST. This function call allows the 
system BIOS to specify the panel type to the VGA BIOS. The system BIOS should get the 
panel type from GPI pins before the VGA chip initialized, and pass this information to VGA 
BIOS through INT 15 Function 5F01h. 
 
Supported standard VGA modes: 
The VGA BIOS supports the IBM VGA Standard 7-bit VGA modes numbers. 
Mode Pixel 
Resolution  Colors 
Memory 
00h/01h 40*25 
16 
Text 
02h/03h 80*25 
16 
Text 
04h/05h 320*200 
2-bit 
Planar 
06h 640*200  2  1-bit 
Planar 
07h 80*25 Mono  Text 
0Dh 320*200  16  4-bit 
Planar 
0Eh 640*200  16  4-bit 
Planar 
0Fh 640*350 Mono 1-bit 
Planar 
10h 640*350  16  4-bit 
Planar 
11h 640*480  2  2-bit 
Planar 
12h 640*480  16  4-bit 
Planar 
13h 320*200  256 8-bit 
Planar 
Note: All Standard VGA Modes are limited to the standard VGA refresh rates. 
 
Supported extended video modes: 
CRT device will support all listed VESA mode; and other devices such as PANEL & TV may 
be limited to the mode support due to their characteristics.