FIC M295 User Manual

 

Outline of the M295 / M296 

Power Button 
Press the Power button either to power on or power off the system. The Power button is also a 
“Smart” switch, meaning that it recognizes when the system is in Suspend mode. If in 
Suspend mode, pressing the Power button will bring it out of Suspend mode and resume to 
the system’s last state. You can set the function of power button from the power management 
setting in Windows Control Panel. Always check the Power LED after pressing the power 
button to know the power status of the notebook. 
 

o

  If you are unable to power off the system, use the power override function. Press the 

power button and hold it in place for four seconds. The system will then power off.  

 
Touch Pad Pointing Device 
Built in just below the keyboard panel is the glide pad pointing device. The left and right 
select buttons of the glide pad is found below the glide pad surface. The left select button is 
configured (by default) as the left button you normally click on the left button of your mouse, 
while the right select key is configured as the right mouse button. The scroll button makes it 
easy to browse upwards or downwards in the software screen. 
 
To move cursor, place your finger lightly on the glide pad and move in the desired direction. 
If you reach the end of the pad, lift your finger and place it back down on the other side.  
 
The glide pad is compatible with the standard PS/2 mouse and can be activated using the 
normal DOS or Windows PS/2 mouse driver. You can also disable the glide pad in the BIOS 
Setup program. 
 

o

  You can execute a left button click function by simply tapping on the glide pad 

surface once. Refer to the User Guide of the notebook for more information. 

 

 

1-12 

 FIC M295 / M296 Service Manual