FIC M295 User Manual
Installation and Upgrade
2.3.4 Removing the CPU
The M295 / M296 features Intel Pentium 4 SFF uFCPGA Processors. It is located on the
upper left side of the system motherboard.
To install or replace the CPU, follow the steps below:
1. Before removing the CPU module, you need first to disassemble keyboard and heat sink
upper left side of the system motherboard.
To install or replace the CPU, follow the steps below:
1. Before removing the CPU module, you need first to disassemble keyboard and heat sink
plate.
2. Using a flat screwdriver, turn the socket lock counter-clockwise direction to unlock CPU
from the socket.
Lock CPU
To unlock CPU, use
flat-screw driver and
turn lock counter
clockwise direction.
To lock CPU, turn
lock clockwise
direction.
flat-screw driver and
turn lock counter
clockwise direction.
To lock CPU, turn
lock clockwise
direction.
Unlock CPU
Figure 2-10
CPU Assembly
3. Remove CPU and insert the preferred CPU.
4. Using a flat screwdriver, turn the socket lock clockwise direction to lock CPU onto the
4. Using a flat screwdriver, turn the socket lock clockwise direction to lock CPU onto the
socket.
FIC M295/M296 Service Manual 2-11