FIC M295 User Manual

 

Software Functional Overview 

3.3.7 Super 

I/O 

This controller contains 16550A or FIFO Enabled UART, ECP/Standard/Bi-

directional Parallel Port meeting the 1284 specification, and an Infrared port that 
supports IrDA Super IR. 
 

3.3.8   PCMCIA 

 

ƒ Individually accessed, dual-buffer implemented. 
ƒ Support for 1 CardBus slots (one type II stacked). 
ƒ Support for 3.3v, 5v and 12v (flash programming) cards. 
 

3.3.9  LED Indicator 

The table below lists down the functions of the Status LED indicator: 
 

IDE accessing LEDn  This LED will turn on while accessing the IDE Device. 

FDD accessing LEDn  This LED will turn on while accessing the FDD Device. 

Turn on (Amber) – Battery is under charging mode 

Turn off – Battery full charged or no battery 

CapsLock LEDn 

This LED will turn on when the function of CapsLock is active. 

ScrollLock LEDn 

This LED will turn on when the function of ScrollLock is active. 

NumLock LEDn 

This LED will turn on when the function of NumLock is active. 

Green – System is powered on. 

Green Blinking- System is entered suspend mode. 

Amber – Battery Low. 

Mail LEDn 

This LED will turn on while Mail was arrived. 

GPRS statusn 

This LED will turn on while GPRS module power on. 

 

L 

n - There LEDs will be turned off during Suspend mode. 

 

3.3.10   Hot Keys Definition 

All Hot keys must be active at all times under all operation systems. 
 

z 

Hot Keys by Internal Keyboard 

 

Fn + F3 

Toggle Display 
(LCD/CRT/TV/LCD&CRT) 

BIOS Handler 

Fn + F6 

System Speaker On/Off 

BIOS Handler 

Fn + F8 

Brightness Increase 

Controlled by PMU08 

Fn + F9 

Brightness Decrease 

Controlled by PMU08 

 
3-8 

FIC M295 / M296 Service Manual