Ciprico Media Vault 4400 User Manual
MV 4440_Ciprico Inc.
5-13
MediaVault 4440 User Manual
Operations
Changing Modes When Hot-Plugging vPODs
In some cases the MV 4440 cannot be power-cycled, and the mode must
be changed while the vPOD is hot-plugged. Perform the following
procedure.
be changed while the vPOD is hot-plugged. Perform the following
procedure.
1.
Select a mode.
2.
Set the mode number with the M
ODE
S
ELECT
switch located on the
vPOD. See Figure 5-3. Use a pointed object (such as pen tip) to press
the desired button at the M
the desired button at the M
ODE
S
ELECT
switch.
3.
Insert the vPOD into the MV 4440.
4.
As soon as the OK LED illuminates, press and hold the M
ODE
S
ET
button (see a description of the button on
5.
Keep holding down the M
ODE
S
ET
button until two beeps are heard.
6.
Release the M
ODE
S
ET
button.