Chip PC CDC01927 User Manual

 
 
 
 
 
 

 

21 

Jack PC Hardware User Manual - Training Department 
Version 0506 
 

See section 3.3. for a complete overview of all connectors of your Jack PC device. 

Connect USB peripheral device (USB keyboard, mouse, printer etc.) to a USB port.  

 

 

 

  

Connect the monitor video cable to the Display connector, and 

connect the monitor power 

cable to a power source and turn the monitor ON. 

 
 
 
 

In case no PoE is available, connect the power adapter DC cord into the device’s DC 
jack, and connect the wall-mount power supply to the mains power socket. Once the 
Jack-PC receives power, the Power/Fail LED will blink. 

 
 

 

 

 

 

Connect Microphone to the Audio-In jack (pink).  

Connect headphones/external speakers to the Audio-Out jack (green). 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Note: USB devices may be connected after product being powered although some devices 
would not work properly due to driver loading problems. In this case, Press the Reset 
Button and the USB devices will work properly. 
 

Note: Models EFI6700-6800 support only Analog displays. Model EFI-6900 supports both 
Analog and DVI displays, to use an Analog display you will need to purchase from Chip PC 
the DVI to VGA adaptor cable (see Accessories list). 

Note: The Power/Fail LED will change to steady green once the system finished booting up. 
In case a self-test procedure has failed, the Power/Fail LED will remain steady red. In this 
case use the troubleshooting chapter of this manual. 

Note: the device can be connected to both PoE and mains power socket (using the 
external power supply) simultaneously – without causing any damage to the unit. In such 
case the unit will work in a fail-safe mode, and in case one of the sources will drop, it will 
automatically continue to operate using the second power source.