Chicago Electric 91332 User Manual

SKU 91332 

 

 

    Page 3  

attachment to do the work of a larger industrial tool. There are certain 

applications for which this tool was designed. It will do the job better and 

more safely at the rate for which it was intended. Do not modify this tool and 

do not use this tool for a purpose for which it was not intended.

6. 

Dress properly.  Do not wear loose clothing or jewelry as they can be 

caught in moving parts.  Protective, electrically non-conductive clothes and 

non-skid footwear are recommended when working.  Wear restrictive hair 

covering to contain long hair.

7. 

Use eye and ear protection.  Always wear ANSI approved impact safety 

goggles. 

8. 

Do not overreach.  Keep proper footing and balance at all times. Do not 

reach over or across running machines.

9. 

Maintain tools with care.  Keep tools sharp and clean for better and safer 

performance. Follow instructions for lubricating and changing accessories. 

Inspect tool cords periodically and, if damaged, have them repaired by an 

authorized technician. The handles must be kept clean, dry, and free from oil 

and grease at all times.

10. 

Disconnect power. Unplug Charger Adapter when not in use.

11. 

Remove adjusting keys and wrenches.  Check that keys and adjusting 

wrenches are removed from the tool or machine work surface before 

operating tool.

12. 

Avoid unintentional starting.  Be sure the switch is in the Off position when 

not in use and before plugging in. Do not carry any tool with your finger on 

the trigger.

13. 

Stay alert.  Watch what you are doing, use common sense. Do not operate 

any tool when you are tired.

15. 

Check for damaged parts.  Before using any tool, any part that appears 

damaged should be carefully checked to determine that it will operate 

properly and perform its intended function. Check for alignment and binding 

of moving parts; any broken parts or mounting fixtures; and any other 

condition that may affect proper operation. Any part that is damaged should 

be properly repaired or replaced by a qualified technician. Do not use the 

tool if any switch does not turn On and Off properly.

16. 

Guard against electric shock.  Prevent body contact with electrical circuits 

when using this tool.

17. 

Replacement parts and accessories.  When servicing, use only identical