Chicago Electric 95065 User Manual

SKU 95065

For technical questions, please call 1-800-444-3353

Page 2

SpECIFICATIOnS

Batteries

4.8 V NiCd Battery Pack

Charging Time

No more than 10 hours

Charger Adapter

Input: 120 VAC, 60 Hz

Output: 6 VDC, 300 mA

Speed

200 RPM

Chuck

Hex drive

Features

6 – Driver bits included

Save This Manual

Keep this manual for the safety warn-

ings and precautions, assembly, operating,

inspection, maintenance and cleaning pro-

cedures. Write the product’s serial number

in the back of the manual near the assembly

diagram (or month and year of purchase if

product has no number). Keep this manual

and the receipt in a safe and dry place for

future reference.

GEnERAL SAFETy RuLES

WARnInG! Read all instructions

Failure to follow all instructions

listed below may result in electric

shock, fire, and/or serious injury.

The term “power tool” in all of the

warnings listed below refers to your

line-operated (corded) power tool or

battery-operated (cordless) power

tool.

Work Area

Keep your work area clean and well

lit. Cluttered benches and dark areas

invite accidents.
Do not operate power tools in

explosive atmospheres, such as in

the presence of flammable liquids,

gases, or dust. Power tools create

sparks which may ignite the dust or

fumes.
Keep bystanders, children, and visi-

tors away while operating a power

tool. Distractions can cause you to

lose control. Protect others in the work

area from debris such as chips and

sparks. Provide barriers or shields as

needed.

Electrical Safety

Avoid body contact with grounded

surfaces such as pipes, radiators,

ranges, and refrigerators. There is an

increased risk of electric shock if your

body is grounded.
Do not expose power tools to rain

or wet conditions. Water entering

a power tool will increase the risk of

electric shock.
Grounded tools must be plugged

into an outlet properly installed and

grounded in accordance with all

codes and ordinances. Never remove

the grounding prong or modify the plug

in any way. Do not use any adapter

plugs. Check with a qualified electri-

cian if you are in doubt as to whether

the outlet is properly grounded. If the

tools should electrically malfunction or

break down, grounding provides a low

resistance path to carry electricity away

from the user.
The Charger Adapter is equipped

with a polarized plug (one blade is

wider than the other). This plug will

fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install

a polarized outlet. Do not change the

plug in any way. Double insulation

eliminates the need for the three wire

grounded power cord and grounded

power supply system.
Do not abuse the Charger Adapter

charging cable. Never use it to carry

the tool or pull the Adapter from an

outlet. Keep the charging cable away

from heat, oil, sharp edges, or moving

parts. Replace Charger Adapter when

charging cable is damaged.

REV 07l