Chauvet Welding System DERBY X User Manual
1.
B
EFORE
Y
OU
B
EGIN
What is included
¾ 1 x Derby X™
¾ Power
¾ Power
Cord
¾ Warranty
Card
¾ User
Manual
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the
contents to ensure that all parts are present, and have been received in good
condition. Notify the shipper immediately and retain packing material for
inspection if any parts appear damaged from shipping or the carton itself shows
signs of mishandling. Save the carton and all packing materials. In the event that
a fixture must be returned to the factory, it is important that the fixture be returned
in the original factory box and packing.
contents to ensure that all parts are present, and have been received in good
condition. Notify the shipper immediately and retain packing material for
inspection if any parts appear damaged from shipping or the carton itself shows
signs of mishandling. Save the carton and all packing materials. In the event that
a fixture must be returned to the factory, it is important that the fixture be returned
in the original factory box and packing.
AC Power
This fixture has an auto-switching power supply that can accommodate a wide
range of input voltages. The only thing necessary to do before powering on the
unit is to make sure the line voltage you are applying is within the range of
accepted voltages. This fixture will accommodate between 100V and 240V AC
50-60 Hz. All fixtures must be powered directly off a switched circuit and cannot
be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or
dimmer channel is used solely for a 0% to 100% switch.
range of input voltages. The only thing necessary to do before powering on the
unit is to make sure the line voltage you are applying is within the range of
accepted voltages. This fixture will accommodate between 100V and 240V AC
50-60 Hz. All fixtures must be powered directly off a switched circuit and cannot
be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or
dimmer channel is used solely for a 0% to 100% switch.
Contact Us
W o r l d W id e
General Information
CHAUVET
3000 North 29
th
Court
Hollywood, FL 33020
voice: 954.929.1115
fax: 954.929.5560
toll free:
voice: 954.929.1115
fax: 954.929.5560
toll free:
800.762.1084
Technical Support CHAUVET
3000 North 29
th
Court
Hollywood, FL 33020
voice: 954.929.1115 (Press 4)
fax: 954.929.5560 (Attention: Service)
voice: 954.929.1115 (Press 4)
fax: 954.929.5560 (Attention: Service)
World Wide Web
www.chauvetlighting.com
Derby X™ User Manual
3
7/14/2008 1:27 PM