Canon 802.11g 54M WLAN User Manual

 

Use the DHCP screen to set up your gateway as a Dynamic Host Configuration 

Protocol (DHCP) server. DHCP servers automatically assign IP addresses to all the 

clients on your network.   

If you choose to enable DHCP, make sure there is not already a DHCP server on your 

network.  

If you don't enable DHCP, you'll need to manually configure an IP address for each computer on 

your network. If you do enable DHCP, make sure that each computer is configured to retrieve an IP 

address automatically.   

Specify the IP Pool Starting Address to designate the first IP address that can be 

assigned to a computer on the network. Similarly, specify the IP Pool Ending 

Address to designate the last IP address that can be assigned.