Canon LV-X6 Instruction Manual
19
2. Installation and Connections
S-V
IDEO
IN
VIDEO
IN
SER
VIC
E PO
RT
AUDIO
IN
AU
DIO O
UT
R
L
AU
DIO IN
ANALOG IN-1
ANALOG IN-2
M
EN
U
BA
CK
KEY
STO
NE
WA
RNIN
G
P
OWER
AUTO PC
INPUT
VO
L
-
VO
L
+
LAMP
Connecting the Supplied Power Cord
Connect the supplied power cord to the projector.
First connect the supplied power cord's two-pin plug to the AC IN of the projector, and then connect the other plug of
the supplied power cord in the wall outlet.
First connect the supplied power cord's two-pin plug to the AC IN of the projector, and then connect the other plug of
the supplied power cord in the wall outlet.
Make sure that the prongs are fully inserted into
both the AC IN and the wall outlet.
both the AC IN and the wall outlet.
To wall outlet
←
CAUTION:
Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while
the projector is turned on and immediately after the projector is turned off.
the projector is turned on and immediately after the projector is turned off.
CAUTION:
Do not turn off the AC power by pressing the main power switch or by unplugging the power cable when the
projector is powered on. Doing so can cause damage to the projector.
projector is powered on. Doing so can cause damage to the projector.
TIP: The projector can be turned off (by either the main power switch or by unplugging the power cable)
during its cool down period after it is turned off using the remote control or via the power button on the control panel.
during its cool down period after it is turned off using the remote control or via the power button on the control panel.