Cannondale MC500 User Manual
© 2001 Cannondale Corporation - All Rights Reserved
2
SBM01_05.fm
INSTRUCTIONS
NOTE :
Before starting this procedure, we strongly
recommend that you read the Cannondale
Diagnostic Tool Manual (P/N 912-5001985) included
with kit (P/N 912-5001986). The manual contains
important background information and explanations
that will be helpful to know before you attempt this
simple, but very technical procedure. We also
recommend that the service technician performing
the work have moderate PC skills.
recommend that you read the Cannondale
Diagnostic Tool Manual (P/N 912-5001985) included
with kit (P/N 912-5001986). The manual contains
important background information and explanations
that will be helpful to know before you attempt this
simple, but very technical procedure. We also
recommend that the service technician performing
the work have moderate PC skills.
1.
From the Windows START menu select
DealerCal.exe from the Cannondale
Diagnostic and Maintenance program group.
The Cannondale Diagnostic Tool main menu
will open. See example below.
DealerCal.exe from the Cannondale
Diagnostic and Maintenance program group.
The Cannondale Diagnostic Tool main menu
will open. See example below.
2.
Connect the data cable to the vehicle and PC.
See the Cannondale Diagnostic Tool Manual
for details.
See the Cannondale Diagnostic Tool Manual
for details.
3.
Disconnect the vehicle starter solenoid
harness lead. The solenoid is mounted on the
inner side of the left engine rail just below the
fuel filter mount. In the illustration below, the
radiator is shown removed for clarity; the
harness lead. The solenoid is mounted on the
inner side of the left engine rail just below the
fuel filter mount. In the illustration below, the
radiator is shown removed for clarity; the
connector can be released easily using only
your finger tips.
your finger tips.
4.
Press the vehicle engine start button briefly.
This will activate the engine management
circuits. The green LED on the data cable
block should be lit. Look at the block to
confirm that it is on. If you read the
Cannondale Diagnostic Tool Manual, you
would have learned that this LED stays on
while the ECU is active and that the ECU
remains active for only 2 minutes if
communications are not occurring- then it
shuts down automatically. If the light goes out
anytime during this procedure, just press the
engine start button again to turn it on.
This will activate the engine management
circuits. The green LED on the data cable
block should be lit. Look at the block to
confirm that it is on. If you read the
Cannondale Diagnostic Tool Manual, you
would have learned that this LED stays on
while the ECU is active and that the ECU
remains active for only 2 minutes if
communications are not occurring- then it
shuts down automatically. If the light goes out
anytime during this procedure, just press the
engine start button again to turn it on.
5.
Click the OPEN Calibration file (saved)
button in the Cannondale Diagnostic Tool
main menu.
button in the Cannondale Diagnostic Tool
main menu.
Then, select the file named 00202 located in
00200
00200
00200,X440s,082801
SOLENOID
DISCONNECT HERE