Cambridge CambridAzur 650BD User Manual

650BD

azur

ENGLISH

Front panel

Front panel display

Standby/On

Switches the unit between Standby mode (indicated by a dim power LED)

and On (indicated by a bright power LED). Standby is a low power mode

where the power consumption is less than 1 watt. The unit should be left

in Standby mode when not in use.

USB port

Port for interfacing to a flash/memory card or

Mass Storage Device

Notes:
• Only USB 2.0 certified products with the USB 2.0 logo on them are

supported by the 650BD. Please either consult the manufacturer of

the USB 2.0 product to make sure it is properly certified, or go to

www.usb.org for a list of approved products. We cannot be held

responsible for any incompatibility issues.

• This unit supports

USB Mass Storage Class Bulk-Only Transport

devices only. Most USB thumb drives, portable hard disk drives and

card readers conform to this device class. Other USB devices such as

MP3 players, digital cameras, and mobile phones may not be

compatible.

• Supported USB drives must be formatted with the FAT (File Allocation

Table) or FAT32 file system. Drives formatted with NTFS file system are

not supported.

IR sensor

Receives IR commands from the supplied Azur Navigator remote control.

A clear unobstructed line of sight between the remote control and the

sensor is required.

Display

Used to display the 650BD’s functions and playback state, etc. Please

refer to the front panel display section at right for more information.

Disc tray

Use the Open/Close button to activate.

Open/Close

Allows you to open and close the disc tray for loading of discs. Pressing

Play will also close the tray and start playing a disc if one is loaded.

Play/Pause

Plays the disc and pauses (freezes) playback.

Stop

Press once to stop playback. Pressing Play will cause the playback to be

re-started from the same position. Press Stop again to fully stop playback.

Skip

Press once to skip between tracks/chapters.

1. Disc Type Indication

– Indicates the currently playing disc type.

2. Track/Chapter

– When illuminated, the displayed time applies to a

track or chapter.

3. Title/Group

– When illuminated, the displayed time applies to a title or

group.

4. Total

– When illuminated, the displayed time is the total play time.

5. Remaining

– When illuminated, the displayed time is the remaining

play time.

6. Playback Status

– Indicates playback status such as Play, Pause,

Repeat, Repeat All, Random/Shuffle, and A-B Repeat.

7. Angle Icon

– Indicates that the scene contains additional camera

angle(s) that can be selected.

8. HDMI

– Indicates that the HDMI output is active.

9. Network

– Indicates that the unit is connected to a network.

10. Mute Icon

– Indicates that the audio is muted.

11. Audio Channel Indication

– Indicates whether the audio is 2ch stereo

or multi-channel surround.

12. Main Display

– Text messages and numeric display.

13. Audio Type Indication

– Indicates the type of audio tracks playing.

3 2 4

10 11