Cabletron Systems 6A000/ZX-250 User Manual
SmartCell 6A000/ZX-250 Reference Manual 2-161
Console Commands
Route
Use Route to administer IP (internet protocol) route management to an ATM client through an Ethernet network. It
allows network management software to communicate across a network of switches.
allows network management software to communicate across a network of switches.
Operators
add, delete, show
Parameters
SERVER
SVC
X
X
Input Parameter
Description
Value/Field Size
Default
[DestNetIP]
IP network number of a remote network.
dot decimal/
7-15 characters
7-15 characters
NONE
[GatewayIP]
IP address for gateway to the remote network.
dot decimal/
7-15 characters
7-15 characters
NONE
Output Parameter
Description
[flags]
The flags field is a bitmask of different options:
•
0x1 – Route is usable (“up”)
•
0x2 – Destination address is a gateway0x4 – Host-specific routing
entry
entry
•
0x10 – Created dynamically by ICMP redirect
•
0x20 – Modified dynamically by ICMP redirect
[Refcnt]
Internal/debugging info.
[Use]
Number of times this route has been used to send a packet.
[Interface]
Interface used for forwarding packets on this route.