Cabletron Systems 6A000/ZX-250 User Manual
SmartCell 6A000/ZX-250 Reference Manual 2-177
Console Commands
SVC
Use SVC (switched virtual circuit) to see the SVCs created on the switch.
Operator
show
Parameters
In the Output Parameter table below, (<
/d
>) appears next to parameters that are available only through the
show svc
/d
(detailed) command. When (<
/s
>) (summarized) appears next to a parameter, it means that this parameter is
displayed in both the summarized and the detailed tables.
SERVER
SVC
X
X
Input Parameter
Description
Value/Field Size
Default
[PortNumber]
Port number on the switch.
ALL, A1...A4,
B1...B3, C1...C4,
D1...D4
B1...B3, C1...C4,
D1...D4
ALL
[CrossConnId]
Chronological sequential index marker of the
circuits. All point-to-multipoint (PMP)
cross-connect IDs of the same low port have the
same cross-connect ID.
circuits. All point-to-multipoint (PMP)
cross-connect IDs of the same low port have the
same cross-connect ID.
1,2,3,4.../
n/a
n/a
Output Parameter
Description
Value/Field Size
[ConnId] (<
/s
>)
Same as [CrossConnId] input parameter
1,2,3,4.../
n/a
n/a
[Conn SubId] (<
/s
>)
Id of the leaf in PMP connection. If you do not specify a sub
ID, all leaves of a PMP connection identified by the
cross-connect ID will be deleted.
ID, all leaves of a PMP connection identified by the
cross-connect ID will be deleted.
1,2,3,4.../
n/a
n/a
[Traffic Type] (<
/s
>)
Traffic type of the descriptor.
CBR, NRTVBR,
RTVBR, UBR
RTVBR, UBR