Cabletron Systems 6A000/ZX-250 User Manual
SmartCell 6A000/ZX-250 Reference Manual 3-9
Boot Load Commands
ponf
Use
ponf
to set whether POST diagnostics are run by default when the switch is started.
Example
=>ponf p
Modifying Control/Stat field to execute POST, please wait...
New postOnOff value programmed successfully into Control/Stat field.
=>
ponf
does not affect the behavior of the
go
command.
Parameter
Explanation
s
POST is off. Switch goes directly to start-up.
p
POST is on. Switch runs POST before going to switch
operating software.
operating software.
none
Same as
s
; POST is off.