Cabletron Systems 6A000/ZX-250 User Manual

2-42   SmartCell 6A000/ZX-250 Reference Manual

  Console Commands

Descriptions

[LES Address]

ATM address of the LANE server.

[Distribute VPI/VCI]

VPI/VCI values of the control direct VCC or multicast send VCC.

[Distribute Method]

Indicates whether the control distribute VCC is established for ALL clients or only 
PROXY clients.

[LAN Type]

Type of ELAN.

[BUSATMAddress]

ATM address of the BUS (specify when the LES and BUS are not co-located). 

[ELANNumber] <elannumber>

[ELANName] <elanname>

[ConnectMethod] <connectmethod>

[ELANType] <elantype>

[Multipoint] <distributevcctype>

[MTU] <maximumframesize>

[Distribute] 

Administrator

Quickly configures the switch. This command adds the 
ELAN entry in all three databases (BUSELAN, 
LESELAN, and LECSELAN) and activates the ELAN.

[ELANNumber] <elannumber>

Administrator

Quickly configures the switch. This removes a specific 
ELAN. This command first checks that all servers 
(LECS, LES, and BUS) exist before deleting any of 
them.

[ELANNumber] <elannumber>

All

Displays an ELAN created by either the quick 

 

or the multiple set of commands to add an ELAN. There 
might not be LECS information (as seen in the first 
example) if the ELAN was created by

, and 

 and 

had not been completed. 

The LECS information is displayed if you use 

 

or if not, after you enter 

 (as seen in the 

following B example below).