Cabletron Systems 6A000/ZX-250 User Manual
SmartCell 6A000/ZX-250 Reference Manual 2-49
Console Commands
IISPRoute
Use IISPRoute (interim inter-switch signaling protocol) to manipulate the IISP routes configured on the switch (see
“UNIRoute” for further routing commands).
“UNIRoute” for further routing commands).
Operators
add, delete, show, flush
Parameters
SERVER
SVC
X
X
Input Parameter
Description
Value/Field Size
Default
[ATMAddress]
ATM address assigned to the port, client, or server. 13-20 byte hex-based/
Up to 59 characters
NONE
[PortNumber]
Port number on the switch.
A1...A4, B1...B3,
C1...C4, D1...D4
C1...C4, D1...D4
A1
[Metric]
Metric value. Used when the next hop is
accessible through various parallel links. If there
are two IISP routes to a destination, every time a
call setup arrives, it is routed using one of the
parallel IISP routes, alternatively. You can specify
the number of times each route is used in a row by
the metric variable.
accessible through various parallel links. If there
are two IISP routes to a destination, every time a
call setup arrives, it is routed using one of the
parallel IISP routes, alternatively. You can specify
the number of times each route is used in a row by
the metric variable.
1-5
1
[EntryIndex]
Index into the IISP route table for the IISP ATM
address entry.
address entry.
2 characters
0
Output Parameter
Description
[Length]
Address length in number of bits. IISP allows you to enter any number of bits. Only
multiples of a byte (an even number of bits) can be entered and the calculated address
length is displayed.
multiples of a byte (an even number of bits) can be entered and the calculated address
length is displayed.