Cabletron Systems 6A000/ZX-250 User Manual
2-68 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
LECS
Use LECS (local area network emulation configuration server) to manage the operational status of the LECS on the
network.
network.
Operators
start, stop
Parameters
This command has no parameters. Just type
start lecs
or
stop lecs
at the switch prompt.
Descriptions
The status of the LECS setting is persistent, so if you reboot the switch while you
have the LECS stopped, the LECS will continue to be stopped, even after
rebooting.You have to manually start the LECS again.
have the LECS stopped, the LECS will continue to be stopped, even after
rebooting.You have to manually start the LECS again.
SERVER
SVC
X
X
Operator
Parameters/Permissions
Description
start lecs
Administrator
Starts an LECS not previously started. If you have stopped an
LECS, you must restart it before adding ELANs to the LECS
or clients to the ELAN. You normally keep only one LECS in
your network, across all VLANs, ELANs, and switches.
Creating more than one LECS functionally splits the network
unless the databases are fully replicated.
LECS, you must restart it before adding ELANs to the LECS
or clients to the ELAN. You normally keep only one LECS in
your network, across all VLANs, ELANs, and switches.
Creating more than one LECS functionally splits the network
unless the databases are fully replicated.
stop lecs
Administrator
Shuts down the LECS on the local switch.