Avocent Access Router Cyclades-PR1000 User Manual
Cyclades-PR1000
Chapter 2 - What is in the Box
16
Next, place the PR1000 on the horizontal surface, aligning the fuzzy and prickly Velcros® as shown in Figure 2.4.
Cyclades-PR1000
Horizontal Surface Where the PR1000 Will be Secured
FIGURE 2.4 HOW TO ATTACH THE PR1000 TO A HORIZONTAL SURFACE
Vertical Surfaces
There are two slots in the base of the PR1000 to allow it to be affixed to a vertical surface. Screws and nylon
fixings (for cement walls) are provided for this purpose.
fixings (for cement walls) are provided for this purpose.
Make holes 184,8mm (7.27 in) apart on the vertical surface. If using a drill, a 5mm bit should be used. Four
millimeters (or a little more than 1/8 in) of the screw should be exposed (not counting the head).
millimeters (or a little more than 1/8 in) of the screw should be exposed (not counting the head).